Speed regulation range: 0-1400 RPM (stepless speed regulation). Temperature control range: RT + 5-400?
Temperature control method: intelligent constant temperature. Diameter 300mm (11.8 inch). Height 195mm (7.68 inch).Packing size: 32.00 x 32.00 x 32.00 cm (12.612.612.6 inch). [High performance] -Electromagnetic stirrer adopts DC brushless motor, stable performance, large stirring torque, low noise, safe and reliable. [Collective heating] -Adopting the heat collector heating method, the heated container is under strong heat radiation, the temperature is uniform, and the efficiency is high, which is more suitable for the heating treatment of spherical flasks.
[Digital display temperature control] -digital display instrument, intuitive temperature display. The advanced temperature control system can precisely and precisely control the temperature of the heated liquid. [Various uses] -The electromagnetic stirring heater is suitable for heating and stirring liquids in universities, petrochemical, pharmaceutical, environmental protection and other institutions.Magnetic laboratory stirrers are ideal equipment for laboratories and chemical institutions. Either water bath or oil bath. Turn on the power, prepare the cup, open the lid of the stainless steel container, place the cup in the middle of the stainless steel container, add thermal oil or silicone oil to the appropriate height in the stainless steel container, and pour the blender into the cup solution. Turn on the power switch, the indicator light is on, and then turn the speed potentiometer clockwise to stir from slow speed to fast speed. Adjust to the desired speed. When heating, fix the temperature probe on the bracket, and then move the bracket to insert the temperature sensor probe into the solution at least 5cm, but the stirring will not be affected.
Turn on the heating switch and set the desired temperature. The digital display lights up and the current oil temperature is displayed on the upper row of the meter. Set temperature: Press the SET button to set or check the temperature set point.
Press the SET key and the numeric tube character starts to flash, indicating that the instrument enters the setting state, press? To increase the setting value, press the? Key to decrease, long press the? If the agitator jumps during work, please turn off the power and then turn it back on. The speed can be adjusted from slow to fast, and then work normally.
To ensure your personal safety, please use a three-phase safety socket, and it is best to properly ground it when using it. The instrument should be kept clean and tidy, and the power supply should be cut off if not used for a long time, and the switch should be turned off to avoid accidents. When the stainless steel container is not filled with heat-conducting oil and the temperature sensor is not connected, please do not turn on the temperature control switch to avoid damage to the electric heating tube and the thermostat. Please read the manual carefully before using this instrument to avoid unnecessary trouble.
Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. The item "110V Magnetic Stirrer DF-101T With Hot Plate Digital Heating Lab Mixer10L+Barrel" is in sale since Wednesday, October 21, 2020. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Lab Mixers, Shakers & Stirrers\Magnetic Stirrers & Hotplate Stirrers". The seller is "honestdentalshop" and is located in Rowland Heights, California.
This item can be shipped to United States.